Core Overview
- Automotive and motorcycle repair
- Electrical and HVAC maintenance
- Plumbing and confined-space inspection
- Construction and job-site lighting
- Emergency roadside repair
- Camping and outdoor activities
Key Product Advantages
- Dual Light Architecture — 800LM COB Flood + 250LM XPE Spotlight
The G25’s complementary dual-light system covers the full spectrum of professional illumination needs. The COB panel (800 lumens, 5200K daylight white) produces a wide, shadow-free flood beam ideal for illuminating engine bays, workbenches, and electrical panels at close to medium range (30m). The side-facing XPE LED (250 lumens, 7300K cool white) concentrates output into a longer-throw beam (60m) for inspecting overhead conduits, searching dark corners, and navigating dark job sites. Both light sources are independently selectable through the mode sequence and retain separate brightness memory.
- Five-Way Positioning — Magnet, Hook, Screw Mount, Kickstand, and Flat Placement
No surface or situation limits the G25’s deployment. The strong magnetic base attaches to vehicle panels, steel beams, and machinery. The flip-out hanging hook suspends from overhead pipes, conduits, and shelter frames. The threaded screw-hole mount (standard machine screw compatible) enables permanent or semi-permanent fixture mounting. The fold-out kickstand provides angled tabletop illumination. And the flat-body design rests stably on any horizontal surface. Choose the mount that matches the moment — no adapters, no extra hardware.
- Intelligent Single-Button Control with Quick-Off and Mode Memory
The G25’s control logic is optimized for professional workflow efficiency. A single button cycles through the four modes (COB High → COB Low → Side Spotlight → Red Flash → Off) with tactile feedback. If the light remains in any mode for more than 8 seconds, the next button press immediately turns it off — no cycling required to shut down. The light remembers the last-used mode and returns to it on next activation. This intelligent behavior eliminates the frustration of cycling through red strobe and low modes just to turn the light off after extended use.
- 3000mAh Power Bank with Four-Segment Battery Display
The built-in 3000mAh polymer battery provides COB runtime of approximately 4.5 hours on high or 10 hours on the side spotlight — enough for a full work shift of intermittent use. The USB-A output port converts the G25 into an emergency power bank for smartphones and devices, a practical advantage on remote job sites. Four blue LED segments provide clear, intuitive battery status: one segment flashing during initial charging, segments illuminating sequentially as charge increases, and all four steady when fully charged.
- Industrial Yellow-Black Design with IP44 Durability
The G25’s distinctive yellow-and-black two-tone color scheme is both a stylistic choice and a functional one — high-visibility yellow ensures the light is easy to locate in dark workshops, cluttered tool bags, and low-light environments where a black-only tool might disappear against dark surfaces. The PC lens + ABS body is built to survive 1-meter drops, and IP44 ingress protection safeguards against dust particles larger than 1mm and water splashes — reliable in workshops, garages, and outdoor settings.
Specifications of G25 Tactical Flashlight
| Parameter | Specification |
|---|---|
| Model | G25 |
| Product Type | Compact Multi-Position Work Light |
| LED Type | COB (Flood) + XPE (Spotlight) |
| Rated Power | COB: 10W / Side XPE: 3W |
| Lumens | COB: 800LM / Side XPE: 250LM |
| Beam Range | COB: 30m / Side XPE: 60m |
| Color Temperature | COB: 5200K / Side XPE: 7300K |
| Light Color | White / Red Flash |
| Battery | Built-in Polymer / 3000mAh (Rechargeable) |
| Runtime | COB (High): ~4.5H / Side XPE: ~10H |
| Charging Time | Approximately 6H |
| Input | DC 5V/1A (Type-C) |
| Output (Power Bank) | DC 5V/1A (USB-A) |
| Water Resistance | IP44 |
| Rated Voltage | 3.7V |
| Material | PC (Lens) + ABS |
| Color | Yellow + Black |
| Dimensions | 113 × 62 × 25mm |
| Net Weight | 143g |
| Barcode | 6975515772947 |
| Light Modes | COB High → COB Low → Side XPE Spotlight → Red Flash → OFF |
| Control Logic | 8-Second Quick-Off (Press after 8s in any mode → OFF), Mode Memory |
| Battery Indicator | 4 Blue LEDs (Flashing = Charging, Sequential = Progress, All Steady = Full) |
| Protection Circuits | Overcharge, Over-Discharge, Low-Voltage Warning |
| Features | Dual Light (COB + XPE), 5-Way Positioning (Magnet, Hook, Screw, Kickstand, Flat), Power Bank, Memory, Battery Display |
Package Contents:
- G25 Compact Multi-Position Work Light ×1
- Charging Cable ×1
- Retail Box ×1
- Anti-Counterfeit Label ×1
Details of SUPERFIRE G25 Tactical Flashlight
Video
常见问题解答
How does the 8-second quick-off feature work, and why is it useful?
The G25’s intelligent control logic is designed around real professional usage patterns. After powering on and selecting a mode, if you work for more than 8 seconds in that mode, the next button press will immediately turn the light off — no cycling through other modes required. If you change modes within the 8-second window, the timer resets. This means that during extended work sessions, you press once to turn on, work for minutes or hours, and press once to turn off — the same simplicity as a single-mode light, but with the versatility of four modes when you need them.
What is the practical difference between the COB flood and XPE spotlight on the G25?
The COB flood panel (800LM, 30m, 5200K) produces a wide, uniform beam with soft edges — ideal for engine bay illumination, electrical panel work, reading documentation, and any task where you need to see a broad area clearly without harsh shadows. The side XPE spotlight (250LM, 60m, 7300K) produces a more focused, longer-throw beam — ideal for inspecting overhead structures, locating objects in dark spaces, and signaling. Professionals typically use the COB for primary task lighting and switch to the XPE for distance checks, navigation, and searching.
How does the five-way positioning system compare to other work lights?
Most work lights in this category offer magnetic attachment as their sole hands-free option. The G25 adds four additional mounting methods: the hanging hook for overhead suspension (conduits, pipes, tent poles), the screw-hole mount for permanent or semi-permanent fixture attachment (workshop walls, under cabinets), the fold-out kickstand for angled tabletop illumination (workbenches, desks, flat surfaces), and the flat body for stable horizontal placement. This eliminates the single-point-of-failure design of magnet-only work lights — if the work surface isn’t ferrous metal, four other options are available.
Can the G25 charge a smartphone while operating as a work light?
Yes, the USB-A output port is active and can charge connected devices while the G25’s illumination is in use. This pass-through functionality means the G25 serves simultaneously as a work light and emergency power source — valuable in power outages, remote job sites, and outdoor camping scenarios. Note that using the power bank output while the light is illuminated will reduce total runtime proportionally, as both functions draw from the same 3000mAh battery.
Is the G25 suitable for outdoor use in rain or wet conditions?
With an IP44 ingress protection rating, the G25 is protected against solid objects larger than 1mm (dust and debris) and water splashes from any direction. It can handle light rain, workshop spray, and damp environments without issue. It is not designed for submersion, heavy rain exposure, or continuous water jet contact. For applications requiring full waterproof operation (submersion, heavy rain), SUPERFIRE recommends our IP65–IP68 rated products. The G25 is best suited for workshop, garage, covered outdoor, and light-weather field use.
Customization & OEM Services
SUPERFIRE provides comprehensive OEM/ODM services for the BL19 Bicycle Front Light, supporting cycling accessory brands, sports equipment distributors, corporate fleet programs, and private-label operations worldwide.
- Brand Customization
- Silkscreen Printing: Your logo, brand name, and technical specifications printed on the ABS body — positioned on the designated flat surface per your design requirements
- Laser Engraving: Available for compatible surface areas requiring permanent, precise marking
- Custom Model Numbering: Assign your internal SKU or product code alongside or in place of the G25 identifier
- Packaging Customization
- Box Design: Full creative control over packaging artwork, material grade (standard cardboard, hang-tab retail, or display packaging), and structural design
- Color Customization: Custom Pantone-matched box colors aligned with your brand identity
- Insert Tray: Custom die-cut or thermoformed insert trays for secure product presentation
- Accessory Bundling: Flexible configuration — customize cable length/specification, add carabiner clips, or bundle with tool accessory kits
- Manual & Documentation: Multi-language user manuals with your company branding, warranty terms, and contact information
- Product Customization
- LED Configuration: Alternative COB and XPE color temperatures for specific application requirements
- Mode Programming: Custom mode sequences, brightness levels, and control logic behavior
- Body Color: Custom yellow/black ratio or alternative color schemes for brand differentiation (minimum order quantities apply)
- Accessory Ecosystem: Custom mounting brackets, vehicle-specific adapters, storage cases, or bundled tool kits
- Quality & Compliance
- CE, FCC, RoHS certification documentation provided for all custom and standard units
- Full compliance documentation package available for customs clearance and retail distribution
- Batch-level consistency validated through incoming QC, in-process inspection, and pre-shipment functional testing
- Third-party lab testing available upon request (SGS, TÜV, Intertek)
- Order & Logistics
- Minimum Order Quantities: Flexible and discussed on a per-order basis depending on product configuration and customization scope
- Sample Lead Time: Approximately 1–2 weeks for standard samples; custom pre-production samples confirmed upon order
- Production Lead Time: Discussed and confirmed upon sample approval — timelines scaled to order volume and customization complexity
- Shipping: FOB Shenzhen / EXW available; customer-nominated forwarders accepted
- Payment Terms: Discussed on order confirmation; flexible terms available for established long-term partners
For OEM inquiries, cycling shop distributor partnerships, or volume pricing,
contact us at service@superfire.com or via WhatsApp at +86 199 2887 7060.
Related Products
立即联系
专业户外照明品牌
–OEM服务
Pre-sales service email
After-sales service email
Complaint email
电话/微信
Factory
No. 88, Tongchang Road, Longdong Dapu, Longgang Stree, Longgang District, Shenzhen City, Guangdong Province, China
Office
Sth Floor, Building No.10, Yuanyang Xintiandi Shuianhuayuan, No. 16 Shenglong Road. Shengping Community, Longcheng Street, LongganProvince, China