Core Overview
- Tactical and law enforcement operations
- EDC (Everyday Carry) and urban preparedness
- Security patrol and perimeter inspection
- Outdoor recreation — camping, hiking, navigation
- Emergency and disaster response
Key Product Advantages
- Tactical Tail Switch for Instant Response
The TL01-X employs a genuine mechanical tail-cap switch for instantaneous ON/OFF control — no delay, no standby drain, no accidental activation in pocket or pack. A secondary side-button provides one-hand mode cycling through all six illumination levels without changing grip. This dual-control architecture separates the tactical imperative of immediate light-on from the operational convenience of mode selection, a design philosophy trusted by law enforcement and security professionals worldwide.
- IP67 Waterproof — Submersion-Ready Durability
Rated IP67, the TL01-X withstands full immersion in 1 meter of water for 30 minutes. Reinforced O-ring seals at every junction, a gasket-protected charging port cover, and anodized thread surfaces ensure reliable operation in heavy rain, flood conditions, maritime environments, and accidental submersion. Where IP44-rated lights fail, the TL01-X continues to perform.
- 1800 Lumens with Regulated Output Stability
The XM3 LED core generates 1800 lumens at 7720K color temperature, projecting a focused beam to 325 meters. Advanced thermal regulation with constant-current control maintains stable output across the battery’s discharge curve — no dimming as voltage sags, no flicker, and no thermal throttling during extended tactical or patrol use. High mode delivers maximum reach for threat identification and search; Moonlight mode (sub-1-lumen) preserves night-adapted vision for covert navigation.
- Six-Mode Versatility — From Tactical to Survival
A complete six-mode cycle covers every operational scenario: High (1800LM, threat illumination/search); Medium (balanced output for general patrol); Low (close-range tasks, preserving battery); Moonlight (covert navigation, reading, extended battery life); Strobe (disorientation and signaling); and SOS (emergency distress). Mode cycling is via the side button, leaving the tail switch dedicated to instant ON/OFF — a deliberate separation that prevents mode confusion under stress.
- Comprehensive Power Safety and Fast Type-C Charging
The TL01-X ships with a premium 3350mAh protected 18650 cell — one of the highest capacities available in a standard 18650 format. Type-C 5V/2A fast charging replenishes the cell in approximately 3.5 hours. Five independent protection circuits (reverse polarity, overcharge, over-discharge, low-voltage cutoff, and intelligent power-saving) safeguard both the battery and the flashlight electronics across every charge and discharge cycle.
Specifications of TL01-X Tactical Flashlight
| Parameter | Specification |
|---|---|
| Model | TL01-X |
| Product Type | Tactical EDC Flashlight |
| LED Type | XM3 |
| Rated Power | 20W |
| Lumens | 1800LM |
| Beam Distance | 325m |
| Color Temperature | 7720K (White Light) |
| Rated Voltage | DC 3.7V |
| Battery | 1× 18650 / 3350mAh (Rechargeable, Protected, User-Replaceable) |
| Max Runtime | Approx. 8 Hours (Lowest Mode) |
| Charging Time | Approx. 3.5 Hours |
| Charging Port | Type-C (5V/2A) |
| Light Modes | High → Medium → Low → Moonlight → Strobe → SOS |
| Switch Type | Dual-Control: Tail-Cap Tactical Switch + Side Mode Button |
| Water Resistance | IP67 (Submersion to 1 Meter) |
| Drop Resistance | 1 Meter |
| Dimensions | 139 × 25 × 30mm |
| Net Weight (Flashlight Only) | 95g |
| Material | Aircraft-Grade Aluminum Alloy |
| Color | Black |
| Beam Type | Fixed Focus |
| Safety Protections | Reverse Polarity / Overcharge / Over-Discharge / Low-Voltage Cutoff / Power-Saving |
| Thermal Management | Advanced Constant-Current Regulation |
Standard Package Contents:
- TL01-X Tactical EDC Flashlight ×1
- 18650 3350mAh Protected Rechargeable Battery ×1
- Type-C Charging Cable ×1
- Pocket Clip (Removable) ×1
- Wrist Lanyard ×1
- Retail Display Box (SUPERFIRE Branded) ×1
- User Manual ×1
Details of SUPERFIRE TL01-X Tactical Flashlight
Video
FAQ
How does the TL01-X's dual-switch system work — can I change modes with the tail switch?
The tail switch is exclusively for ON/OFF — press fully to activate, press again to deactivate. All mode changes are handled by the side button: with the light on, press the side button to cycle through High → Medium → Low → Moonlight → Strobe → SOS. This separation ensures you never accidentally change modes when drawing the light under stress — a deliberate design choice for tactical applications where mode confusion can be dangerous. A single tail-switch press always gives you the last-used mode.
What is the practical difference between IP67 and IP68 ratings for this flashlight?
IP67 (the TL01-X’s rating) certifies immersion in 1 meter of water for 30 minutes. IP68 certification extends to deeper depths and longer durations, but requires product-specific depth and time specifications. For practical use, IP67 means the TL01-X is fully submersible in shallow water — rain, puddles, accidental drops in streams or pools are all within its operating envelope. It is suitable for surface water and heavy marine spray. For sustained underwater use (diving, underwater inspection), consider SUPERFIRE’s dedicated Diving Lights category, which carry IP68 ratings with explicit depth certifications to 100 meters.
How does the 3350mAh battery compare to standard 18650 cells, and can I use third-party batteries?
The included 3350mAh protected 18650 represents a top-tier capacity for this cell format — most standard 18650 cells range from 2200–3000mAh. This translates to approximately 10–40% longer runtime compared to entry-level cells depending on mode selection. Third-party 18650 cells can be used provided they are flat-top, protected, and within the standard 65mm length specification. Unprotected cells are not recommended — the TL01-X’s built-in protection circuits complement, but do not replace, the cell’s own protection PCB. Button-top 18650 cells may not fit due to length constraints.
What distinguishes the TL01-X from the earlier TL01 model?
The TL01-X is a significant upgrade across multiple dimensions: (1) Output — 1800LM vs the earlier model’s lower output rating, driven by a higher-specification XM3 LED; (2) Waterproof rating — IP67 vs the previous model’s IP44, representing a generational leap from splash-resistant to fully submersible; (3) Switch architecture — retains the tactical tail switch while adding a dedicated side mode button for cleaner mode management; (4) Battery — ships with a 3350mAh high-capacity cell; and (5) Charging — upgraded to Type-C 5V/2A fast charging.
Is the TL01-X suitable for mounting on firearms or tactical gear?
The TL01-X is designed as a handheld tactical flashlight with a standard 25mm body diameter, compatible with most 1-inch flashlight mounts used on Picatinny rails, helmet rails, and webbing systems. The tail-cap switch enables momentary activation — useful for signaling and weapons-mounted operation. However, the TL01-X is not a dedicated weapons light; for sustained recoil-exposed mounting, explore our Professional Lights and Tactical Flashlights categories, where select models incorporate reinforced mounting interfaces and recoil-tested driver boards.
Customization & OEM Services
SUPERFIRE provides comprehensive OEM/ODM services for the TL01-X Tactical EDC Flashlight, supporting law enforcement procurement, security equipment distributors, tactical gear brands, and private-label operations worldwide.
- Brand Customization
- Laser Engraving: Department names, badge numbers, unit insignias, or corporate logos precision-etched onto the aluminum body — permanent, wear-resistant, and suitable for asset tracking
- Color Anodizing: Custom hard-anodized body colors beyond standard black (available subject to volume); military olive drab, desert tan, and gunmetal gray are popular tactical options
- Serial Numbering: Sequential or custom-format serial numbers for inventory management and warranty tracking
- Packaging Customization
- Retail Box Design: Full creative packaging service — branded retail boxes with die-cut windows, magnetic closure gift boxes, or minimalist tactical packaging
- Kit Configuration: Custom bundle packaging with additional accessories — spare batteries, multi-bay chargers, holsters, or compatible mounting hardware
- Multi-Language Documentation: User manuals and quick-reference cards translated and branded in your required languages with agency-specific operational guidance
- Product Customization
- LED Configuration: Alternative LED options for modified output, warmer color temperatures, or infrared (IR) variants for night-vision-compatible operations
- Mode Programming: Custom mode sequences tailored to your operational requirements — e.g., High-Strobe only for tactical use, or High-Medium-Low only for patrol applications
- Switch Configuration: Alternative switch layouts, silent-operation switches, or pressure-pad remote switch integration for weapons-mounted applications
- Battery Options: Pre-installed higher-capacity 18650 cells, dual-cell configurations, or custom battery wrap branding
- Marking & Compliance: Agency-specific regulatory markings, certification labels, and identification plates
- Quality & Compliance
- CE, FCC, RoHS certification documentation for all standard and custom configurations
- IP67 waterproof testing reports available upon request
- Batch-level QC reporting including output verification, waterproof testing, and drop-test records
- Pre-shipment inspection with photographic documentation
- Order & Logistics
- Minimum Order Quantities: Flexible and discussed on a per-order basis depending on product configuration and customization scope
- Sample Lead Time: Approximately 2–3 weeks for standard samples; custom pre-production samples confirmed upon order
- Production Lead Time: Discussed and confirmed upon sample approval — timelines scaled to order volume and customization complexity
- Shipping: FOB Shenzhen / EXW available; customer-nominated forwarders and consolidation services accepted
- Payment Terms: Discussed on order confirmation; flexible terms available for established long-term partners and government procurement
For OEM inquiries, cycling shop distributor partnerships, or volume pricing,
contact us at service@superfire.com or via WhatsApp at +86 199 2887 7060.
Related Products
Max Output
300w
Distance
Output
Time
Range
Power
300m
Max Output
300
Distance
Output
Time
Distance
Power
300m
Max Output
Distance
Time
Power
GET IN TOUCH NOW
Professional Outdoor Lighting Brand
–OEM Services
Pre-sales service email
After-sales service email
Complaint email
Phone/Wechat
Factory
No. 88, Tongchang Road, Longdong Dapu, Longgang Stree, Longgang District, Shenzhen City, Guangdong Province, China
Office
Sth Floor, Building No.10, Yuanyang Xintiandi Shuianhuayuan, No. 16 Shenglong Road. Shengping Community, Longcheng Street, LongganProvince, China